In the address bar, type your Windows 10 PC IP address, on an FTP link format, and press Enter.Here’s the quickest way to test your FTP server after configuring the firewall and forwarding port 21 on your router. Now Apply the new changes, and save the new router configurations. PC’s TCP/IP address: Open Command Prompt, type ipconfig, and the IPv4 address is your PC’s TCP/IP address.On the address bar, enter the router’s IP address and press Enter.įind the Port Forwarding section – usually, you’ll find this feature under the WAN or NAT settings.Ĭreate a new port forwarding that includes the following information:.Typically, it’s a private address in the .x range. Find out and note down the Default Gateway address (Router IP address).First Open the command prompt, type command ipconfig and hit the enter key.(For more specific instructions to forward TCP/IP ports, you should check your router’s manufacturer support website.) Here find the steps to configure most routers. So That your FTP server can be reachable from the internet and you can access it from anywhere. Now We need to Configure on Router and open TCP/IP port number 21 to allow connections to your PC. At this point, you should be able to use your favorite FTP client to connect your newly created FTP server from your local network.Ĭonfigure the Router to Allow external connections

Ftp ports to open on firewall